holy fuck is right… but… does it work with legs???
yes !!
but how much extend
^^^^^^^^^^
I NEARLY CHOKED
ENJFDFNFATFVFDF
finally. i can be accurate
This is too fucking great to not reblog
I give it MASCLES
BIG MACHO
🤣🤣
LMAOOOOOO
Okay but for anyone who legit wants to know how to calculate it correctly:
The elbow joint on average rests a couple inches higher than the navel, so if you measure how long the distance is from the middle of the shoulder to that point then you have the length of the upper and fore arms!
So if anyone’s wondering about legs too, the simplest rule of thumb is that the length from the top of the leg to the knee is equal to the distance between the top of the leg and the bottom of the pectorals:
And I wanna stress that when i say “top of the leg” i’m not talking about the crotch (please don’t flag me tumblr it’s an anatomical term) i’m talking about the point where the femur connects to the pelvis, which is higher up on the hips:
It’s easier to see what I’m talking about in this photo of a man squatting:
So yeah if you use that measurement when using this technique you should get fairly realistically proportioned legs:
But remember! messing with proportions is an important and fun part of character design! Know the rules first so you can then break them however you please!
HOW THE HELL DID I FIND THIS POST OMG
Licherally in the midst of drawing a guy and crying at how bad the arms are. Thanks Tumbles
I only ever saw the part where people started drawing the limbs outrageously long and genuinely wanted to know how to fix that, so I’m really thankful to see the rest.
This is just reminding me that I need to pick up a pencil. But I know I’m not going to ever finish the drawing. 🤷♀️
Things I wish I had read in “beginner” sewing tutorials/people had told me before I started getting into sewing
You have to hem *everything* eventually. Hemming isn’t optional. (If you don’t hem your cloth, it will start to fray. There are exceptions to this, like felt, but most cloth will.)
The type of cloth you choose for your project matters very much. Your clothing won’t “fall right” if it’s not the kind of stretchy/heavy/stiff as the one the tutorial assumes you will use.
Some types of cloth are very chill about fraying, some are very much not. Linen doesn’t really give a fuck as long as you don’t, like, throw it into the washing machine unhemmed (see below), whereas brocade yearns for entropy so, so much.
On that note: if you get new cloth: 1. hem its borders (or use a ripple stitch) 2. throw it in the washing machine on the setting that you plan to wash it going forward 3. iron it. You’ll regret it, if you don’t do it. If you don’t hem, it’ll thread. If you don’t wash beforehand, the finished piece might warp in the first wash. If you don’t iron it, it won’t be nice and flat and all of your measuring and sewing will be off.
Sewing’s first virtue is diligence, followed closely by patience. Measure three times before cutting. Check the symmetry every once in a while. If you can’t concentrate anymore, stop. Yes, even if you’re almost done.
The order in which you sew your garment’s parts matters very much. Stick to the plan, but think ahead.
You’ll probably be fine if you sew something on wrong - you can undo it with a seam ripper (get a seam ripper, they’re cheap!)
You can use chalk to draw and write on the cloth.
Pick something made out of rectangles for your first project.
I recommend making something out of linen as a beginner project. It’s nearly indestructible, barely threads and folds very neatly.
Collars are going to suck.
The sewing machine can’t hurt you (probably). There is a guard for a reason and while the needle is very scary at first, if you do it right, your hands will be away from it at least 5 cm at any given time. Also the spoils of learning machine sewing are not to be underestimated. You will be SO fast.
society really lost the war when dressing nice / slutty = “gay” “metrosexual” “is he 💅🏻”. we had decades of men wearing crop tops and short shorts without blinking an eye and now it’s ye ole pilgrim standards and talk of scandal if they show their knees
ngl I keep forgetting that Hobby Lobby is a real store that people go to. That people actually think of it as a craft store and not as a crazy Christian mass artifact smuggler. I google “Hobby Lobby” and get a page full of results that make me go “wtf is this craft supplies and operating hours shit, I thought we all knew this place for smuggling looted cuneiform tablets out of Iraq”
